KorvaJoin the waitlist
Home

Cut Four Equal Legs for a Patio Table That Does Not Rock

Outdoor furniture is pricey for something so simple, with the option of angled legs using the saw alone.

AI image
makeuseof.com · 5 weekend home projects you can finish with a Ryobi drill and circular saw

Writer Allison Kirschbaum would rather spend a weekend building a small wooden side table than pay outdoor furniture prices for a place to set coffee or a potted plant.

Her recipe is deliberately spare: four matching supports, a flat square surface, and bracing below to hold it together.

The whole project turns on one detail. As Kirschbaum puts it, "The tricky part is getting all four legs the same length." Otherwise the table will rock every time a drink goes down.

Kirschbaum keeps her cuts on track with a circular saw that offers built-in guides for straight and angled cuts. That guidance helps when four pieces must match.

As Kirschbaum writes, "If you want to angle the legs slightly," the saw has a bevel adjustment, which tilts the blade, reaching 50 degrees at most, so no added gear is needed for that touch.

After cutting, she assembles the pieces with a drill/driver whose knurled chuck, a metal grip with a textured pattern, helps keep bits from slipping. And if the result is not quite as polished as furniture you could buy, that is fine. As Kirschbaum puts it, "The point is to make something that fits your space, and you built it yourself."

Questions people ask

How do I actually get four legs exactly the same length?

Measure and mark all four legs together, then cut with the board firmly clamped and the saw guided by its sightline. Cutting them one after another from the same setup reduces small errors that cause rocking.

What does a beveled or splayed leg mean?

Bevel means tilting the saw blade sideways so the cut edge is slanted rather than square. A slight slant on a table leg makes the foot sit a little wider than the top, which can look more finished and add stability.

Can a simple wooden table live outside?

Yes, if you use wood and fasteners rated for exterior use and let any paint or stain fully cure. Kirschbaum warns to check the stated drying time, since a finish may not be ready by Sunday afternoon.

More in Home