KorvaJoin the waitlist
Tech

Turn One Way to Close the Blinds, the Other Way to Open Them

After exact percentages proved too slow for quick turns, the dial just started movement and left stopping to a button.

AI image
Foxy's Lab · Your smart home doesn't need more automations. It needs buttons

A DIY smart-home builder wanted the living-room blinds on a five-button controller with a rotary dial. In a build described on Nov. 2, the builder landed on a simple pattern that just started the blinds moving.

The first try checked the current position, added an increment, and then sent a new target position. Because the setup had to look up the position each time, quick turns of the dial made the response crawl, and closing the blinds felt painful.

For the dial turns in that setup, the builder stopped using percentages there. Rotating right started closing the blinds, while rotating left started opening them, with no target level to calculate.

The center press handled the rest. It checked whether the blinds were open or closed, and if they were, it flipped them to the other state. If they were already opening or closing, the same press sent a stop and left them where they were.

The builder packed the repeated checks into a subflow, which turns a group of software blocks into a reusable template. Precise position control remained available outside the dial turns, and a one-minute inactivity timer reset the controller to the main lights mode after each press or turn, to reduce wrong-mode mistakes.

Questions people ask

Why not just set the blinds to an exact position like 50 percent?

You can, and many motorized blinds accept a target such as 50 percent. The tradeoff is speed and added steps, because the controller must read the current position, calculate the next one, and send it for every small turn.

Will this work with any motorized blinds?

In most cases, yes, if the blinds already work with a smart-home system and understand open, close, and stop commands. Those three commands are widely supported, while position control varies more by brand.

What happens if I keep turning the dial after the blinds start moving?

Once the blinds start, extra turning does not make them move faster. They keep going in the chosen direction until they reach the end or until the center press stops them.

More in Tech